Exalux Connect+ Full Wireless Kit 1 Universe - Wi-Fi to DMX Gateway

The CONNECT+ Full Wireless DMX 1 Universe - WiDi to DMX Gateway gives you full wireless control of all LumenRadio CRMX wireless products from your iPad. It is provided with a robust and waterproof case. The included EXALUX™ CONNECT+ is a dual band Wi-Fi to DMX gateway that allows wireless lighting control via Art-net compatible Apps. CONNECT+ is compatible with most of the DMX Apps (BlackOut, DMX Connect+, Luminair). The TX100N LumenRadio CRMX™ transmitter gives full DMX wireless capability.

£2,653.86 £2,211.55

Usually shipped in 2-3 days

SKU

515-010

Exalux Connect+ Full Wireless Kit 1 Universe - Wi-Fi to DMX Gateway

Built-in dual band Wi-Fi 2.4 and 5.0 Ghz MiMo access point,
Built-in dual universe DMX node,
Built-in DMX recorder,
Built-in Ethernet Switch,
RDM compliant,
Compatible with any DMX Lighting device or controller,
Multiple XLR outputs for wired DMX distribution,
Multiple RJ45 ports for Ethernet distribution,
V-LOCK battery / DC5-24V powered,
Power Over Ethernet (PoE),
Firmware upgrade through USB port,
Power over DMX (PoD) feature on DMX outputs,
SnapLink Extension port for future expansion
TX100N, in short:
- Built-in LumenRadio CRMX™ transmitter,
- 1 DMX universe
- External DC / PoD power mode.

Included in the Box

1 CONNECT + Wi-Fi /ArtNet / DMX - Wi-Fi to DMX gateway
1 TX100N Wireless DMX transmitter
1 DMX cable (5-pin)
1 24W/24v Wall-plug PSU
1 Adapter Set
1 x Protective Case

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Exalux Connect+ Full Wireless Kit 1 Universe - Wi-Fi to DMX Gateway

Dual Band Reliable Wi-Fi

EXALUX™ CONNECT+ features a high performance dual band (2.4Ghz+5Ghz) MiMo Wi-Fi Access point. This means you have a reliable and responsive connectivity between your IPAD and your EXALUX CONNECT+.

Switch the 5Ghz Wi-Fi to use your CONNECT+ with a CRMX transmitter such as the TX100N and avoid any interference, or use it if the area is too noisy.

In addition, EXALUX™ CONNECT+ features a mode that makes it possible to automatically select the clearest frequency band.

Wireless scalability.

Plug your EXALUX TX100N wireless DMX transmitters to the XLR 5 outputs to create a wireless DMX link between your iPAD and your lighting fixtures.
The CONNECT TX100N can be connected directly to the CONNECT+ or a few metres away via a DMX cable to get the best connection. Thanks to the PoD, no extra power supply is required.

2 universes - 2 DMX outputs

EXALUX™ CONNECT+ pushes the limits of DMX.

CONNECT+ makes it possible to manage two DMX universes without adding an additional interface, and thus, meets the need of the most complex fixtures.

Fully Compatible with the most popular Apps

With EXALUX™ CONNECT+, you get the full potential of the most populars Apps such as BlackOut and Luminair.
EXALUX™ CONNECT+ is fully compatible with all DMX applications based on the Art-Net protocol.

The Future Power Supply Mode

EXALUX™ CONNECT+ can be powered via the Ethernet cable using a PoE injector. This allows the CONNECT+to be installed in the best place without worrying about power supply constraints.
PoE mode is particularly useful if you use the CONNECT+ as an Art-Net Nod with a live hardware console.
Thanks to PoD (PowerOverDMX) technology, you will be able to power additional DMX devices by connecting them directly to the 5-pin XLR connector.

Philips HUE ready

Connect your Philips HUE Bridge to one of the RJ45 ports of the EXALUX™ CONNECT+ and control your Philips HUE bulbs with your iPAD.

(The Philips HUE bridge is not supplied with the CONNECT+)

Upgradeable and Back-Up

EXALUX™ CONNECT+ firmware can be updated using an USB stick.

Wide range Power Modes

Thanks to its wide supply range (5 to 28VDC), EXALUX™ CONNECT+ can be powered with a V-Lock battery, an external PSU or a PoE Injector.

EXALUX™ CONNECT+ is compliant with the new 26VDC V-Lock battery standards.

More Information

More Information
Barcode	3760252033795
Delivery Time	Usually shipped in 2-3 days
Price	£2,211.55
Brand	Exalux
Manufacturer Code	CNT.003.002
Strapline	The CONNECT+ Full Wireless DMX 1 Universe - WiDi to DMX Gateway gives you full wireless control of all LumenRadio CRMX wireless products from your iPad. It is provided with a robust and waterproof case. The included EXALUX™ CONNECT+ is a dual band Wi-Fi to DMX gateway that allows wireless lighting control via Art-net compatible Apps. CONNECT+ is compatible with most of the DMX Apps (BlackOut, DMX Connect+, Luminair). The TX100N LumenRadio CRMX™ transmitter gives full DMX wireless capability.