RME ADI-4 DD - AES to ADAT and ADAT to AES converter
PRICE MATCH
We are committed to giving you the best prices possible and pledge to price match on most products offered by an authorised UK based dealer selling officially manufactured or imported UK stock with full manufacturers warranty.
To enquire about price matching this product then please enter where you have seen this product cheaper and your contact details.
- The competitor must have the product in stock and available for purchase as a new item
- Written confirmation can be obtained to verify the price
- The competitor must be an officially authorised UK dealer for the product requested
For any further details please call us on Freephone 0800 644 4466
Drag Product into Basket
Gallery Photos
     |
Manufacturer Code: RME ADI-4 DD
 | adi4dd_Manual.pdf (307KB)
|
RME ADI-4 DD Highlights
- AES/EBU frontend for RME's digital I/O cards (ADAT optical I/O)
- Serves as 8-Channel AES and ADAT I/O for all digital mixing desks with ADAT or AES ports
- Allows to operate up to 4 SPDIF or AES devices
- Converts between AES-3, SPDIF and SPDIF optical
- Removes jitter from AES-3 and ADAT signals
Conversion modes (selection):
- 8-Channel AES to ADAT optical converter (96 kHz)
- 2-Channel AES to 8-Channel ADAT splitter (96 kHz)
- 8-Channel ADAT to AES converter (96 kHz)
- 2-Channel AES to 8-Channel AES splitter (96 kHz)
- 4-Channel AES Double Wire to AES Single Wire converter (96 kHz)
- 4-Channel AES Single Wire to AES Double Wire converter (96 kHz)
Included in the Box
- ADI-4 DD
Description
This device basically consists of two converters: four AES-3 inputs to double ADAT outputs, and double ADAT inputs to four AES-3 outputs. The double ADAT ports enable full 8 channel support, from 32 kHz up to 96 kHz (S/MUX). The unit provides one XLR I/O directly. A DB-25 connector allows for a use of industry standard AES-3 I/O breakout cables. Setting an internal connector easily changes the DB-25 connector to meet the pinout of Tascam (Digidesign), Yamaha and Euphonix cables.
All in all the ADI-4 DD shows an unsurpassed flexibility together with a sensational price point. It is a perfect interface solution in all areas, from home user up to broadcast applications.
| Digital I/O | 1 x XLR, 4 x via DB-25 connector, electrically isolated, highly sensitive input stage (< 0.3 Vpp), SPDIF compatible, Second ADAT port can be switched to serve as SPDIF I/O, 2 x TOSLINK, 24-Bit |
| Word Clock | BNC, low-impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof |
| Sampling Frequency | 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable (Sync/word clock) |
| Size | (WxHxD) 215 x 44 x 100 mm |
| Power Supply | External high-quality switching power supply included, for worldwide operation at 100-240 Volt |
Be the first to write a review!
