Profoto Pro-7b 1200 Battery Generator with FREE Light Head

PROFOTO SPECIAL OFFER

Now includes:

• 1 x Pro-7b
• 1 x Pro-b head FREE

Profoto Pro-7b 1200 Battery Generator Highlights

• up to 250 full power flashes from a single battery cassette
• fast recycling, 0.29-2.8secs
• motion freezing flash durations: 1/1400 - 1/3000 sec
• full 7 f-stop range in 1/6 step adjustments
• asymmetrical or symmetrical power distribution
• 100W modelling lamp

Included in the Box

• 1 x Pro-7b 1200
• 1 x Lead Acid Battery
• 1 x Sync Cable
• 1 x Charger 2A
• 1 x User Guide
• 1 x Warranty

Description

The Pro-7b accepts all Pro heads : the ProHead, the ProRing, and the ProTwin head. Designed for the Pro-7b, there is also the smaller Pro-B Head: light and portable, but still equipped with a strong 100 W modeling lamp. Worth a special mention is the ProTwin head. With two separate Pro-7b generators, it gives you 2400 Ws in a single head – or faster recycling.

Leaving the studio with the Profoto Pro-7b, you are bringing 250 full power 1200 Ws flashes. Along with two lamp outlets accepting the entire range of Profoto light shaping tools. And all of that in a box that recycles in just 2.8 seconds.

You can also use it while recharging back in the studio, using the snap-on universal power adapter, the Pro-7b can actually operate as a regular flash generator while the battery is being recharged. The adapter is fast, charging an empty battery in just 2.5 hours, and it accepts a wide range of input power: 12–24 V or 90–240 V.

Included with every Pro-7b is a standard 110/230 V charger, loading the battery in 5 hours. Needless to say, the battery is replaceable. In other words, you just bring as much energy as needed. Also, because the Pro-7b battery is completely memory free, there is no penalty for partial charging.

The Pro-7b gives you fine-grained energy control with the output power adjustable over a full seven f-stop range, from 18.75 Ws up to 1200 Ws, in increments of 1/6 f-stop, for really precise control. The two outlets allow the power to be split symmetrically or asymmetrically with a 2:1 ratio. Of course the unit provides consistent output flash after flash, hour after hour. Designed for the rugged conditions on location, the Pro-7b features sturdy knobs, rubber-clad grips and frames, as well as the outlets and switches conveniently placed on top. Also, the generator is equipped with the Profoto special non-arching safety connectors, for easy connecting/disconnecting of the head at any time. Fully integrated with the Pro-7 system.

Be the first to write a review!